Interior screen for Time Life Building in London’s Bond Street One of a series of windows in interior of London Law Firm Window at the Tate Gallery in St Ives. 5m x 5m - designed by Patrick Heron Window for a Chapel in Dortmund by Graham Jones

Laminated Antique Glass | Mouth-Blown Glass Panels

Laminated antique glass brings the colour and character of genuine mouth-blown glass to large, modern panels. Instead of being held in lead, each piece of antique glass is bonded to float glass, creating a fluid mosaic of colour without the dark outlines of traditional stained glass.

How it differs from stained glass

Traditional stained glass joins pieces with lead strips, which limits panel size and draws a visible outline around every shape. In laminated antique glass, pieces of mouth-blown antique glass are cut and laminated onto a sheet of float glass. The result keeps the depth, ripples and tonal variation of antique glass while giving the designer a cleaner, more flowing image.

Key benefits

Larger panel sizes than leaded construction allows
A fluid, painterly look with no black lead lines
Genuine mouth-blown glass, with its natural variation in colour and texture
A flat, robust panel supported by float glass, easier to clean

Precision cutting for a tight mosaic

Quality depends on the cut. Every piece is cut precisely so that joints sit tightly together, forming a continuous mosaic of colour. This takes skilled handwork and careful planning from the first drawing, and it is where our 35 years of experience shows. Close-fitting joints also mean the image reads as one continuous piece rather than a collection of fragments.

Colour, light and scale

Antique glass is blown by hand, so each sheet differs in saturation, texture and tiny surface movement. We select sheets to build a continuous image, grading colour across the panel the way a painter would. At large scale, this creates a window or screen that changes character through the day as daylight moves across it.

Where it suits

Laminated antique glass suits large feature panels in contemporary sacred spaces, public buildings and interiors where light and colour should be the focus. One example is our work at Lancelot Place, and you can find more in our Public Art projects. For work that calls for traditional lead lines, our stained glass service may be the better match.

Specification and installation

We design, manufacture and install every panel, advising on safety glazing, fixing and building regulations for each location. Because one team handles the whole process, the finished artwork matches the approved design and fits the opening precisely. Our guide to architectural glass techniques explains how this technique sits alongside the rest of our range.

Frequently asked questions

Stained glass is assembled with lead strips, while laminated antique glass is bonded to float glass. That means no lead lines, a flatter finish and larger panels. Both use genuine mouth-blown glass, so you keep the depth and warmth of antique colour either way.

Panels can be considerably larger than a leaded window, within the limits of float glass sizes, handling and access to site. Tell us the size of your opening and the access route to site, and we will confirm what is achievable and how the panels will be handled and fixed.

Ask about laminated antique glass panels: Contact us

stained glass

stained glass

This technique involves mouth-blown glass, cut into shapes, perhaps painted and fired, and then held together in a mosaic of lead.  The industry is permanently renewed by the need to restore and upkeep so much medieval and victorian stained glass.  As a medium for modern glass art it is still relevant in older buildings but less used in contemporary buildings.


honk kong airport

transparent enamels

These can be screen-printed, airbrushed or painted onto glass and then fired.  The glass can be transparent or etched.  The colours can be very rich and deep, though some specific colours cannot be achieved with these enamels.  There is something mysterious and alchemical about transparent enamels – they can be unpredictable when mixed and even show subtle changes in colour depending on whether you print on the tin side of glass or not!  Printing can be done one colour at a time, on one surface of a piece of glass only. The enamelled glass is fired in the toughening plant, thus the emerging product can be of any thickness and can conform to all building regulations.


st pancras

opaque enamels (fritted glass)

These are much more widely used commercially, the result frequently being referred to as ‘fritted glass’.  The opaque enamels are more predictable than transparent enamels, and can achieve almost any colour.   They show up equally from the interior or the exterior.  But, they are not same as transparent colours and, in my view, can seldom match them in subtlety and beauty.


john lewis, newbury

digital opaque enamels

These are essentially the same medium but, instead of being screen-printed onto the glass one colour at a time, they pass through an ink-jet system.  Thus a multicolour image can be created in a single process.  After printing the enamels are fired in the normal way making them completely permanent.  The process, as so often with the latest technology, is produced at much lower cost.


hornsby school

digitally printed interlayers

This process is a digitally printed film laminated between two panels of glass. The laminate material on either side of the glass provides a substantial, but not 100%, protection against degradation of the printed colours from daylight.


st johns wood

resin painted glass

This is a technique not widely used, but that has applications in certain contexts. Optimally the shapes are carved into glass with a sandblaster. This creates a perfect bonding surface for the resin as well as defined shapes for the colours. The colour is then poured or painted onto the surface of the glass. This resin brings the glass back to transparent, which makes the colours very striking. The colours can be very rich and can be mixed to create striking effects.


villa astana

slumped glass

Glass is heated over a mould to a temperature that allows the glass to slowly sag into a mould. Moulds can be created from many different materials giving many different effects. The availability of computer controlled kilns, that can heat and cool glass at controlled speeds, transformed this process from something complex and time consuming to something that can almost be done at the push of a button. The range of shapes, textures is infinite. The glass can be toughened. The technique creates a glass that is very textural and organic and works very well in older buildings as well as new.


ince residence

fused glass

This is a process where layers of glass are heated to quite high temperatures so that they fuse together. This can be done with coloured glass, powdered colours, layers of float glass, creating different shapes etc.


UKS

etched glass

Etching glass refers to both acid-etching and sand-blasting, both of which remove the transparency from glass by changing the surface. Acid etching is less used now as there are ceramic enamels which almost perfectly mimic the effect of acid etching. This means that repeated patterns can be created at very low cost, and a the effect is much more durable and scratch resistant than acid etching. Sandblasting is mainly a way of carving into glass and thus creating relief patterns.


eden house, bishopgate

dichroic glass

This is just one of many different types of glass on the market. Dichroic glass has a coating which means it is sometimes transparent and sometimes reflective and each mode reveals a different colour. Mostly the glass will be somewhere between these two extremes so the glass can reveal many different mixtures of colours. - or for short film here.